Pages

Sunday, October 25, 2020

I am officially W3EDP-less.

 The W3EDP came down this morning. It was a little more difficult than I had thought it would be. It was really up there! Unless the entire tree came down that wire wasn't coning down on its own.

I began by undoing where the balun was hanging by the house. That was easy enough. Then I loosened the anchor point at the other end. Lastly, I untied the center support that was holding the wire in the tree. I thought once I loosened that, it would just fall to the earth. 

That didn't happen.

The dacron rope must be wrapped around some limb pretty well. It came down some, but not nearly enough. I ended up pulling the wire through that dogbone insulator that was up there and got it down that way. The center insulator and rope that are still up there are disposable as far as I'm concerned

Now I'm looking at masts to take  the place of the tree once it's down. Perhaps something from DX Engineering or perhaps the MFJ-1904. It doesn't have to be super heavy duty - it just needs to hold an insulator so I can "right angle" the wire to the other side of the back yard.

After that was done,  I straightened out the shack, which is something I've been meaning to do for a while.  I got rid of the large garbage bags of "crap", and got things organized and stowed away. 

72 de Larry W2LJ

QRP = When you care to send the very least!

3 comments:

  1. It's time now to plan out the tower!
    73,
    Mike
    VE9KK

    ReplyDelete
  2. The chimney? Good luck OM... Jim W1PID

    ReplyDelete
  3. Hi Larry, years ago my antenna was connected to a tree as well, but the new neighbor took the tree down. God luck with a new sollution for your antennna. 73, Paul PA0K.

    ReplyDelete