Pages

Thursday, August 22, 2024

Last night

I spent some more time with Skeeter Hunt results, and then it occurred to me. Instead of sending acknowledgements as I post results to  the Scoreboard spreadsheet one by one, I should go through all the e-mails NOW and send acknowledgements. This takes the guess work out of the equation for the Skeeters. So now I can truly say, if you didn't get an acknowledging e-mail from me, I didn't get your log summary.

Thirteen years of doing this, you would have thought this would have occurred to me sooner! Some times I can be so perceptive and on top of things and other times I can be as thick as a brick! Sometimes I get so used to doing what I've been doing that I block out other possibilities for doing things better. Last night I became my own "auto-acknowledgement" tool!

After that, I went down to the shack and opened up the package that I received yesterday from QRP Labs.


When I was down in the shack the other day, I stumbled upon the lithium batteries and holders that I used to use with my PFR-3A. I had them stored away in a few plastic containers. So I took them out and charged up the batteries and changed the connector from the size that the PFR-3A and the KX3 use, to the smaller diameter connector that the QMX uses. Three of the batteries give me 12.1 Volts fully charged, which then drops to just under 12 Volts under load. Perfect for the QMX. I have more batteries and another holder, so I can have two battery packs ready to go whenever I need them. That dummy battery that you see in the 4th position is a wooden dowel with a thumb tack on each end, with a wire going from tack to tack to provide connectivity. Four batteries would produce too high a voltage.

One thing I noticed about the batteries. Of course, just like about everything else, these were manufactured in China. They work fine, but the brand name - "UltraFire". For a lithium battery, I think a better name could have been chosen.

Before I get to the subject of the QMX, you also see a paddle that I just recently purchased. It's a single lever paddle made by CW Morse LLC. 

I found it on eBay after a search on "morse code paddles" that I do from time to time, just to see what's out there. It was $39, and I love single lever paddles and didn't have one for portable ops, so I indulged. It arrived on Monday, but I had to dig up a cable for it, as it didn't come with one. I connected it to the KX3 last night, which I took out of VOX mode so I could use it as a code practice oscillator. I have to tell you, this little guy has a very good feel to it! I was able to adjust the spacing very close, as that's how I like it, and I was able to send code nice and easy! If you're looking for paddles for portable ops, I would recommend that you at least take a look at https://cwmorse.us/. I think you'd be as pleased as I am.

Getting to the QMX. There's going to be a learning curve here. I can tell you I love this little radio already, but it's not quite what I'm used to. After I turned it no, I found out that it was set for 80 Meters. It took me a while to figure out how to change bands. Once I figured out how to get to 40 Meters, I hooked it up to my W3EDP and started tuning around. 

At first, i thought I broke the radio somehow. I could only get it to tune in 10 kHz steps. 7.000 to 7.010 to 7.020 to 7.030 MHz, etc. I couldn't figure out how to get to tune in smaller steps. Then I discovered that you have to go into the menu, go to "VFO Settings" and you have to enable the smaller steps. Wow! Never had to do that on a radio before! I also had to go into the settings to enable the S-Meter, SWR Meter and the Battery Level icon to be displayed. Whew!

It's going to take this fossil a bit of time to master this radio, but once I am there, this is going to be grand! The batteries, the radio, my Emtech ZM-2 tuner and an EFRW will fit into a daypack so easily! I just may start going out at lunchtime to start operating from the Jeep with the Buddisitck again!

I printed out the manual - it's over 100 pages long and I also downloaded the pdf file to my phone. Like I said, I've got a lot of learning to do, but the fun is in the journey as well as the destination. I just hope I don't do anything stupid to accidentally damage it. That would kill me!

72 de Larry W2LLJ
QRP - When you care to send the very least!

No comments:

Post a Comment