I am one of the 20 Meter Foxes tonight!

I know this is short (very short) notice in blog land; but I am the 20 Meter Fox tonight in the QRP-L Foxhunt. If you have NEVER given this a shot ..... it's entertaining and fun!

Here's the deal. Tonight, between 0100 and 0230 UTC, I will be hiding somewhere between 14.050 and 14.070 MHZ. I will be calling "CQ FOX DE W2LJ UP". This will be to indicate that I will be listening up from my transmit frequency. Exactly how far up is for you to figure out.

If I hear you, I will answer (for example):

KB9BVN DE W2LJ TU 559 NJ LARRY 5W BK (RST/State/Name/Output Power)

You would answer (if you were KB9BVN):

TU 559 IN BRIAN 5W BK (Same exchange)

Then I would answer:

TU DE W2LJ CQ FOX DE W2LJ UP

If any fills are needed I would ask you for them. Getting involved in these hunts is not only fun; but it's good CW practice and it's good pile-up practice. If you can get the hang of how to consistently nab Fox pelts, then you're going to increase your odds of getting through (eventually) in the big DX pile-ups. Listening well and figuring out when and where to call are half the battle.

So if you have some time tonight; and want to have some fun, try and grab my pelt. Or perhaps you might want to listen. By the way, there are always two Foxes. Rene K5JX will be my partner in crime tonight. Give a listen for him, too!

72 de Larry W2LJ

QRP - When you care to send the very least!

It may get wet

later this week - a lot wet!

It's too early to tell yet; and hurricanes are notoriously unpredictable, but it looks like Hurricane Earl might hug the Eastern Seaboard as it treks north this week.

Courtesy of AccuWeather.com

For more on Earl, you can go to AccuWeather.com.

On a lighter note, my bag of 12 fiberglass mast sections, which I got through eBay, arrived in the mail today. I haven't given them a good examination yet; but I can only wonder what the letter carrier must have thought. The olive drab bag is labeled, in official military lettering: "CAMOUFLAGE SCREENING SUPPORT SYSTEM WOODLAND/DESERT" with all kinds of official serial numbers and stuff. He probably thinks he's delivering to a survivalist or something. Next thing you know, I'll be put on some kind of watch list !!!! (Just joking!) Actually from when I served with Middlesex County Emergency Management back in the 1980's, I already have State Police and FBI dossiers opened on me from background investigations- so this would be nothing new.

Secondly, Jim W1PID posted another New Hampshire QRP outdoors story. You can read it here. These are always worth reading and really get the "Outdoors QRP" juices flowing! Truly, I think Jim has the outdoors "concept" nailed - his success rate proves this. A small transceiver and a wire, battery and key. I know for a fact that from time to time, I get too caught up in the trappings, worrying too much about the equipment and what to bring. The simpler, the better. KISS holds true to form here; and I think that's a lesson that I personally need to pay better attention to.

Last week, I got around to replacing the AAA battery holder in my AA0ZZ keyer that I got from the Four States QRP Group. The original that came with the kit kind of fell apart; or maybe I applied too much heat when originally installing it. The replacement that I ordered from Jameco arrived last week. I got it all re-wired and finally applied the decal that I made. By they way, that Inkjet decal paper works wonderfully! I highly recommend it.

Lastly, the next project will be to return back to my ATS3B and figure out why it's not working. I'm not sure I even remember from when I last worked on it so many months ago. I hear the "ATS-2" message in the headphones when I power it up. I also managed to calibrate the Reference Frequency Oscillator tonight to exactly 10.000.000 MHz. If I remember correctly, I had problems when I got to the Local Oscillator frequency trim step.

In any event, I am buoyed by the success I eventually had in getting the PFR3A to work. Even though I had a lot of help, I eventually got that to work; so I can probably get this to work - given enough time and research. I always have the ATS Yahoo Group archives to search for clues.

72 de Larry W2LJ

QRP - When you care to send the very least!

2X QRP DX QSO

As things turned out, I did not get the opportunity to head out to the local park with my PFR3A, Fuchs tuner and 69 foot hunk o' wire. I wanted to get the wire up in the tall trees and see how the QRP Project Fuchs tuner behaves. Maybe one day this week or over the long Labor Day weekend.

But I did get some on air time this afternoon, listening for John K3WWP and Mike KC2EGL who were doing a portable outing from a park in Kitanning, PA. As it turned out, I never heard them. But I did go on 20 Meters for a bit and called CQ near the QRP watering hole.

Nyaregyhaza, Hungary

My effort was greeted by a call from Laci HA7UG in . Laci was a solid 579 into New Jersey and I received a 569 report back. Laci and I were both at the 5 Watt level. We exchanged the basics and then the QSB started bothering us, of course!

The only thing better than a DX QSO is when it's a two way QRP DX QSO! It's amazing to think of 5 Watts travelling over all that water and land. It works out to be only 881 miles per Watt; but it's still quite a feat in my book.

Other than the QSO with Laci, it was very quiet on the bands today. There were no major CW contests going on; or at least I didn't hear much in the way of activity. 40, 30 and 20 Meters all seemed very quiet today - almost dead.

So I shut down the station, and Marianne and I took Joey and Cara to the community pool for a few hours. It reached 93F (34C) here today; and they really enjoyed it. Then when we got home, I got a surprise when I checked my e-mail and saw one from my good friend, Bob W3BBO in my In Box. He wrote to tell me that he saw that I was on 20 Meters working DX stations. I was taken aback as to how he could have possibly have known that; when I further read that he was checking out the DX Clusters this afternoon and saw that Laci had spotted ME! First time I've ever been the DX!

Cool beans!

72 de Larry W2LJ

QRP - When you care to send the very least!

It has often been said

that when one door closes; another opens.

So - I have added to the blogroll and introduce to many of you, a new one. New at least, in the sense that it's new to me and may be new to you as well.

The blog is entitled "KIX-Online" authored by Johnathan KB1KIX. It is full of good and practical and useful stuff.

Enjoy!

72 de Larry W2LJ
QRP - When you care to send the very least!

Oh, man !!!!

I note the "passing" of three Amateur Radio blogs on the blogroll.

For some time now, Jeff Davis KE9V has not posted any new entries to his blog; but he has kept up with new entries of his "Cornbread Road" audio series. And although I very much enjoy "Cornbread Road", I also miss Jeff's written posts. From his writing, I can tell that Jeff and I are on opposite poles of the political spectrum; but he is a very talented writer; and I respect his opinions - no matter how much they differ from mine.

And now today, Dick N2UGB and Paul PA0PSY have announced they will no longer commit pen to paper; or fingers to keyboard, whichever you prefer. While I regret their decision; I respect their reasoning and feelings. There are days when this isn't the easiest thing to do. It requires motivation and inspiration to keep it from becoming stale. You want to write about what interests you; and at the same time you don't want to bore the people who are visiting your blog. There are days when you definitely feel that you have "said it all" and it begins to feel pointless. But then there are other days when all you want to do is share your experience about that new mode you tried, that new kit you bought or built, that new country you worked, that great ragchew you just had ........

I look at it this way, if I ever feel this is becoming old, I will probably just post less with more breaks in between. I think sometimes bloggers fall into the trap of "quantity vs. quality". I know I fall into that trap myself, too. But I am still passionate about Amateur Radio and I hope that I can somehow share that with other folks - especially "the newbies". If you haven't tried doing this - give it a shot for a while! Blogger and WordPress are free. You don't have to be Shakespeare or Hemingway. All you have to have is some enthusiasm and a desire to share.

I will keep all three blogs listed on the blogroll for the foreseeable future. Hopefully, Jeff, Dick and Paul might get a burst of inspiration to write about something from time to time. Here's hoping to see more posts from these gentlemen - even if they don't come as often as they used to!

72 de Larry W2LJ

QRP - When you care to send the very least!

160 Meter capable

My K2 is now 160 Meter capable - but not without a few heart stopping moments along the way - all caused by myself, of course.

I've posted previously about my phobia with opening up the K2. My philosophy is, "If it ain't broke don't fix it" or put another way, "Why jump out of a perfectly good airplane?". But, if you want to add options to a K2, you have to open it. I guess another way of putting it is, "If you want to make mayonnaise, you have to break some eggs". So I took a deep breath and proceeded to crack a few eggs.

In whole, the procedure wasn't as bad as I had feared. I installed the 160 board without any difficulty. As it turned out, all I had to do was remove one jumper from the K2's RF board, add three capacitors and do the actual physical installation of the board. I was lucky enough that my K2 is of recent enough vintage that I did not have to swap out two designated capacitors on the RF board. The existing ones were of the right value. I don't enjoy replacing components. Too much chance to do damage to the circuit board - and that's with 22 years of electronics repairs under my belt. I've seen "simple procedures" turn into deep doo-doo.

The alignment, such as it was, was a piece of cake. Using my OHR Wattmeter, I was able to peak L3 and L4 for maximum power output on both 80 and 160 Meters. If I so desire, I can go past 10 Watts out on both bands without breaking a sweat.

The bad things started happening when I started buttoning things back up. The first piece to be put back together was what Elecraft calls the heat sink. The K2's two PA transistors attach to this sheet o' metal (which also acts as part of the housing) in order to transfer heat away from themselves. However, there are two fiber spacers that go between the transistors and the circuit board in order to insure that the transistor bodies A) stay away from the circuit board and B) stay close to the heat sink. Of course, in the process of putting things back together, one of the two fiber spacers went into orbit.

I got out the heavy duty flashlight and checked the basement floor for what seemed like an eternity. I checked my pockets, I checked my socks, I checked my sneakers, I checked everywhere, to no avail. Then I did what some "Old School" Catholics do when they lose something. I said a short prayer to St. Anthony, to ask for his aid in helping find this minuscule piece of insulating collar. In a short while, I was hit with an inspiration. What if the darned thing had never hit the floor? I decided to check the pockets of my antistatic mat. Sure enough that's where the little bugger landed! No need to call Elecraft and wait for a week while new ones were delivered. Thanks, St. Anthony!

Having everything put back together - heat sink, bottom cover, top cover - I connected the antennas, plugged in the key and external power supply. I turned the unit on and ....... no receive audio! What the ........ ??????? (Break out the defibrillator, Honey!) Plugging in headphones ensured me that I was still able to hear received signals; but ...... ????? I disconnected the top cover completely and ran a 9 Volt battery across the speaker terminals. I heard the satisfying crackle which indicated that I had not somehow damaged the speaker. But that probably couldn't be anyway, as I was not getting anything from either the internal or my external speaker.

Slow down, take a deep breath and figure out what's wrong. The thing was working a half hour ago - what stupid thing did I do? It had to be something stupid that I had done.

Sure enough, it was.

When plugging in the wires for the speaker, I had placed the connector on the two pins where you would hook up the internal battery - if I had one! I removed the connector and placed it where it was supposed to go and viola' - sweet audio came racing out of the speaker(s) both internal and external depending on which I had chosen. (You can take the defibrillator back to the hospital, Honey!) I was listening to N1ZZ call "CQ DX" via CW for a few minutes and then went up the band a ways and went into LSB mode to listen to some ragchewing. Everything sounds great! I can even get the K2's internal ATU to get the G5RV down to about a 1.3:1 SWR. But I'm not kidding myself into thinking that that's a long term working solution. Gotta get that 160 Meter vertical built before winter sets in - but I'm sure that will be another story.

72 de Larry W2LJ
QRP - When you care to send the very least!

20 Meter Foxhunt fun!

Wow, what a rush!

The two Foxes for tonight were Paul NG7Z in Washington and Sam N4SAM in Alabama. As I thought, Paul turned out to be the easier pelt to snag. He had a good signal into NJ (especially with the ALC off!) and I managed a QSO at 0133 UTC.

I thought that was going to be it for the evening. I thought that Sam in Alabama was too close to New Jersey for a 20 Meter QSO, and for a long time I couldn't even hear him - or the pack chasing him.

But, as QRPers are fond of saying, patience pays off. During the last half hour of the hunt, I started hearing Sam. He was very weak; but his signal strength began taking an upswing. So I started calling, and calling, and calling.

I finally decided to switch antennas from the HF9V to the G5RV, even though I could hear Sam better with my vertical. So I began a sequence where I would transmit via the wire; and then would hit the K2's antenna switch button to go back to the vertical for receive. With four minutes left in the hunt, I managed a QSO with Sam! I was only a 449; but hey, we made a complete exchange of information and it counted.

A minor accomplishment, I guess, in the big picture of things; but it sure was fun to achieve something that was difficult!

72 de Larry W2LJ
QRP - When you care to send the very least!

NAQCC does itself proud

I was reading John K3WWP's daily "diary" like a lot of you; when I came upon the posting where John relayed how the NAQCC gifted him with a straight key and a Begali paddle.

Way to go NAQCC !!!

If there ever was a booster of that organization, it is definitely John. Tom WY3H conceived the idea, and he and John brought it to fruition, and have made it the success that it is. And that is in no way denigrating the contributions made by the NAQCC volunteers who shared Tom and John's vision and also helped in making the Club as successful as it is.

What started with just a few Hams now numbers more than 4,600 devotees to QRP and CW. And the monthly Sprint is regularly raking in over 100 log entries a month. If there's another monthly QRP Sprint that gets that amount of entries each month, I'm not aware of it - although the closest that I can think of is probably the monthly ARS Spartan Sprints.

And John's daily QRP CW streak is now in its 16th year if I'm not mistaken. Between that effort and his efforts put forth for the NAQCC, it's obvious that John "walks the walk" and doesn't just "talk the talk" where QRP is concerned. A worthwhile consideration for the QRP Hall of Fame, as far as I'm concerned!

Anyway, it did my heart good to see the organization honor John in such a fashion.

72 de Larry W2LJ
QRP - When you care to send the very least!

Another decent deal

Not as good a deal as the fiberglass poles; but another decent one, nonetheless.

The Harbor Freight catalog came through the mail today and what caught my eye immediately was a 180 Watt soldering gun for $8.99 - Item 04328-1DKN.
Not that I am going to have a daily use for it; but this should come in handy for quick antenna wire splices; as well as soldering PL-259s. And for $8.99 plus shipping, it's one of those deals where sometime in the future, I would have smacked myself in the forehead for not getting it.

It is way easier to do PL-259's with a soldering gun than an iron. It is possible to use an iron; but it has to be a hefty one, and it takes a long time to build up enough heat. Then, you always have it in the back of your mind if the solder connection was good enough (at least I do). Whenever I have done a PL-259 with a soldering gun, I have never had one fail. And if I hope to get this 160 Meter antenna project done before winter, this baby will come in handy.

72 de Larry W2LJ
QRP - When you care to send the very least!

NJ QSO Party - "Chirp, chirp, chirp"

Maybe I should emulate the wise cricket to the left; and should consider the NJ QSO Party to be a SSB event. Because QRP and a paddle don't seem to be cutting it!

I have been calling "CQ DE NJ DE W2LJ" for close to two hours now on both 40 and 20 Meters alternately; and all I've gotten is diddly squat. All I seem to be hearing is Mr. Cricket's chirps coming back at me.

Maybe it's just crummy propagation; as I don't hear much on either band, really. Maybe the bulk of activity happened yesterday and I'm just shoveling sand against the tide.

Maybe I'll try a little bit more, later. If you happen to hear someone calling "CQ DE NJ" on either 7.035 MHz or 14.035 MHz, that may be my lone voice crying out in the wilderness.

72 de Larry W2LJ
QRP - When you care to send the very least!

Very slow going

in the QRP ARCI SK Memorial Sprint.

So far in 45 minutes of operating, I have worked the following - N4BP (as always!), AB7AN, NT9K, K0LWV, K9IS all on 20 Meters. 40 Meters is nice and quiet - but no activity there.

I don't know if it's a case of crummy propagation or just a lack of participation; but it's definitely not hopping. If this keeps up, I think I'll pull the plug way before the 1800 UTC official end time.

I have heard K7TQ, Randy in Moscow, Idaho; but the QSB has been really bad and so far he's been between 549 and ESP. I know I can't be much better. I also heard and tried to work Kelly K4UPG, who is the author of one of the blogs in my blogroll. Kelly was about 449 to New Jersey and I tried working him on both the G5RV and the Butternut HF9V - but no dice.

72 de Larry W2LJ
QRP - When you care to send the very least!

Note: Added K4JPN and N5URL on 20 Meters and K3HX on 40 Meters to the total. Pulled the plug at 17:30 UTC - have to get the grocery shopping done!

Good deal !

Hey, I may get that 160 Meter vertical built before winter, yet!

Take a look at this deal on eBay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160456742675&ssPageName=ADME:X:eRTM:US:1123

A set of 12 pieces of 4 foot interlocking fiberglass poles for $7.00 plus shipping! The deal came down to less than $26.00. Let's see ..... if I put eight of these together, it will probably come to about 30 -31 feet total height. The lowest price I was able to find a 31 foot Jackite pole was $60 without shipping!

I found this via K1TP's website.

72 de Larry W2LJ
QRP - When you care to send the very least!

QSO with W2DEC

Urb LeJeune has been trying to have an SKCC QSO with me for a bit now. Due to whatever scheduling conflicts that have stood in our way, we were unsuccessful until tonight. Tonight we hooked up on 80 Meters and exchanged SKCC info. Urb is one of the co-founders of the North Jersey DX Association; and to be invited to a QSO with him was indeed an honor.

Urb hooked me up to a cool spotting page, authored by K3UK. Oddly enough, it's called the K3UK Sked Page and you can find it here. If you're a QRPer, FISTS member, SKCC member or non-member to any group, I think you'd find this a very useful tool for spotting yourself when you want to scare up a QSO on those days when you just can't seem to find anybody around. Needless to say, it worked pretty well! I posted that I was QRV on 3.550 MHz and the QSO with Urb was quickly followed by two more. Neat!

If Ham Radio is like fishing; then spotting yourself is like using a fish finder!

72 de Larry W2LJ
QRP - When you care to send the very least!

Busy weekend

I was going to install the 160 Meter board in the K2 tonight; but I'm a bit on the tired side from a tough day at work.

But the weekend looks like a good opportunity to get some "on air" time in. Tomorrow morning is the QRP ARCI SK Memorial Sprint, which last from 11:00 AM until 2:00 PM EDT. I hope to spend some time in this one.

Then, later in the afternoon, starting at 4:00 PM is the NJ QSO Party. I will put Middlesex County on the air with my blazing 5 Watts and will attempt to hand out as many QSOs as I can, tomorrow and Sunday.

I will actually submit my scores this time, no matter how appalling they turn out to be! ;) I just hope that propagation is with me and that the bands are open.

72 de Larry W2LJ
QRP - When you care to send the very least!

Stupidest thing I've ever done

in my 30+ years in Amateur Radio?

There have been a few; such as frying the finals in my SB-104A, buying used gear that turned out to be dogs. I once bought a Kenwood R599 receiver that some idiot had tuned the 10 Meter band for CB ..... but I managed to rectify that.

Without a doubt, the stupidest thing I have ever done, in my own mind, was to sell my Heathkit HW-8. Back in the 90s, I donated it to one of the Piscataway Amateur Radio Club auctions. If memory serves me, John WA2F was the winning bidder. He's also a member of the Raritan Valley Radio Club. One of these meetings I should ask him if he still has it and make him an offer. Chances are it probably went via the RVRC Hamfest Club table many moons ago.

I've sold a lot of equipment that I've no longer wanted; but when you sell something that you've built with your own two hands ..... there's something regrettable about that. I wasn't into QRP 100% back then. I sure wish I had it now, even though it's definitely not the greatest QRP radio in the world.

Yeah, I could go on eBay or QRZ or eHam and hunt out another; but it wouldn't be the same.

72 de Larry W2LJ

QRP - When you care to send the very lest!

Just as I thought!

I managed to snag a pelt from Don NK6A in California. I heard the Hounds chasing Arn K0ZK, in Maine; but did not hear even a whisper out of him. So it's a "1fur" in New Jersey tonight.

BUT ...... I did manage to build the entire 160 Meter board for the K2 while I was listening for Arn. Funny, but I seem to have misplaced the panel mount BNC connector. I have no idea where it got itself to. Luckily, I have one with a Rockmite kit that I never finished; so I will use that one. I will order a replacement for the Rockmite and a few spares in the meantime.

So now all I have to do is open the K2 and do some minor surgery to install the 160 Meter board. I hate tearing open a perfectly working radio! I will probably swallow hard and bite the bullet possibly Friday night and get it installed and the K2 buttoned back up before this weekend. I have the QRP ARCI SK Memorial Sprint on Saturday as well as the NJ QSO Party this weekend.

72 de Larry W2LJ
QRP - When you care to send the very least!

20 Meter Foxhunt

starts in about 47 minutes.

Don NK6A in California and Arn K0ZK in Maine are the Foxes this week. The way 20 Meters has been lately, I think I will stand a better chance of hitting California than Maine. Maine may just be a tad too close.

We had a CERT meeting tonight in town. South Plainfield's big "End of Summer" bash is coming up with the (52nd or 53rd?) annual Labor Day Parade and fireworks later that night. South Plainfield is one of only three towns in the entire state to have a parade for Labor Day and the CERT team has been providing communications since 2004.

This year we need a big presence at the fireworks, too. Last year there was "an incident" and the plan is to hopefully pair up CERT members with Police and Special Police from neighboring towns.

In addition, I met up with Marv K2VHW and we decided to pursue a club callsign for the newly formed and fledgling South Plainfield Amateur Radio Club. Marv and I will also be meeting up together in the next couple of weeks to plan out another licensing class like the one we held a few years back. Several CERT members as well as at least one of the town's police officers have expressed an interest in earning their tickets.

Looks like autumn may be busy and interesting!

72 de Larry W2LJ

QRP - When you care to send the very least!

Perfect QRP Portable day ???

I really have to start hanging with Jim W1PID !!!!

http://www.mv.com/ipusers/w1pid/aug2/aug2.html

;)


72 de Larry W2LJ
QRP - When you care to send the very least!

QSLs

I like getting and sending QSL cards. I am guilty of not QSLing as fast as I should; but I do eventually get them out. I also like looking at other Ham's QSL cards, especially old ones.

I found this great site through eHam. If you like looking at older QSL cards, I think you will really enjoy this site:

http://oldqslcards.com/

Next project will be the 160 Meter board for the K2. I dug it out and looked at it last night; and even at my snail's pace, I should be able to get through this quickly. I already sorted the parts out. I should be on 160 Meters this Fall and Winter, even without a proper antenna. The 160 Meter vertical that I want to build will have to wait as the purchase of the Jackite pole is on hold for a while.

72 de Larry W2LJ

QRP - When you care to send the very least!

CQing away

I have the K2 on autopilot, calling "CQ FP DE W2LJ" as I type this. So far at 0138 UTC, there is not a whole heckuva lot of activity. I have worked three stations so far, KB6NU and VE3MO on 40 Meters and N4BP on 20 Meters. I have some really bad QRM on 20 Meters, making that band pretty unusable. The only reason I heard Bob N4BP is that he's booming in 20 over 9. Looks like a long night tonight; and I advertised the Sprint in plenty of locations in ample time. I guess folks are busy or on vacation.

On the bright side, I did finish my Fuchs antenna matching unit today. I would have tossed some wire up a tree to play around with it; but today we got some rain (first time in a couple of months!). And it was a nice gentle rain, too. The ground is so hard and dry that a hard rain would have run right off. This rain had a chance to soak in. But the fact is that we could use about a week of this. The forecast for tomorrow is back up to the upper 90s with high humidity. As hot as this summer has been, I will be sad to see it eventually go.

Well, back to the Sprint and maybe I'll hunt and pounce for a bit.

72 de Larry W2LJ
QRP - When you care to send the very least!