Friday, April 21, 2006
Still learning!
I took the time out the other night, to look over things with a "fine toothed eye" as it were; and I found out what wasn't right. When you make a "dah" you push the paddle to the left. The "dah" contact is on a swing arm that should push away from the main part of the pendulum. There was such an amount of rust there; that the "dah" arm wasn't swinging away from the pendulum. I had to swing the entire pendulum to the left to make a "dah"; and that's not correct.
I took the pendulum off the base and squirted a ton of Liquid Wrench in there. It got it to the point where the "dah" contact arm did come loose; but it wasn't swinging freely like it should. It would swing out all right; but would "click" into place and required a lot of force to bring it back to normal. The "dah" tension spring should provide enough force on its own to do that under normal circumstances; and there was no way ANY spring would provide enough return force as things were.
I decided that I was going to order a new trunion pin from Vibroplex. I would take the old one out and seperate the "dah" arm from the main pendulum, clean it all up, and install a new trunion. In the process of beginning to tap the trunion out, I must have dislodged whatever rust or foreign matter was there. The "dah" arm was now flopping around freely; just as it should. I carefully tapped the trunion pin back to the correct location; but in the process of hammering, I flattened out the pivot points! Thank God for Dremel tools! I grinded the ends of the trunion pin to finer points and reinstalled everything where it belonged. The Bug is working 100% precent properly now. The code is coming off much smoother, less herky-jerky; and sounds much better now. I was always wondering why I couldn't transition from "dahs" to "dits" more smoothly - now I know!
The restoration is now complete; and I've learned a thing or two or three in the process. How cool is that?
73 de Larry W2LJ
Thursday, April 20, 2006
Success!
Today it reached about 75 degrees during luchtime; so I went outside and fired up the K1 at the back of my Ford Explorer. This time I had success!I called CQ and was answered by John VE7CBU in Vancouver, British Columbia. Not bad for 5 Watts to a Hamstick mounted on top of an SUV!
I gave John a 589 and he gave me a 539. Then he proceeded to turn his power down to 5 Watts. Guess he wanted to give me a taste of my own medicine!
I had solid copy on him; which was rough on my part, but I managed. Unfortunately, I was not in the confines of my nice quiet shack located in my basement at home. I was in the parking lot at work, sans headphones while at the same time a freight train was blowing past me on the tracks which are located a couple hundred feet behind our building! It made it a tad rough for copying; but I guess that's what we portable QRPers live for! Next time, I'm going to have to remember to pack my headphones in the rig box.
73 de Larry W2LJ
Tuesday, April 18, 2006
Dead Bands
The band, however, sucked. Turning the dial up and down throughout the 20 Meter band yielded nothing. Absolutley nothing. Well almost nothing. I heard quite a pileup down at the bottom of the band. I would assume that that was the VU4 DXpedition on the Andaman Islands. I didn't hear the fox; but I did hear the pack trying to get a nip of the quarry.
Maybe better luck tomorrow.
73 de Larry W2LJ
Wednesday, March 22, 2006
They all passed!
I am happy to report that the entire class passed and are now Technician class licensees, awaiting callsign assignments from the FCC.
It would be an understatement to say that Marv and I were pleased with the results. We were more akin to proud parents; that might be the best way to put it.
The feedback we got from our students was extremely positive. We're hoping that we have the beginnings of a new Amateur Radio club in the embryonic stages. Possibly it will be centered around emergency and public service communications. Getting all of us together for Field Day would be real nice; but maybe too ambitious for this year.
We're also looking into the possibilities of doing this again next winter; with the added prospect of having some of our graduates pitch in and help with the teaching.
73 de Larry W2LJ
Sunday, March 19, 2006
Logging program shootout
A final final decision hasn't been reached, however.
73 de Larry W2LJ
The Advocate
This appeared in the March 19th, 2006 edition of The Advocate, from Baton Rouge, Louisiana.Attic Salt for March 19
Morse Code in danger of disappearing
By ED CULLEN
Advocate columnist
Published: Mar 19, 2006
An editor who was a Coast Guard radioman handed me a copy of a wire story about the Morse Code. Across the top, he’d written — “dit, dit, dah, dit — dah, dit, dah, dah — dit, dit.”
The editor’s coded message, written in a way discouraged by our instructors at Navy radio school, said “FYI.”
In the 1960s, radio telegraphy was still taught in military communication schools. It differed from the way Samuel F.B. Morse’s code sounded. Modern Morse Code, sent by radio transmitter, is a series of short and long tones. Early Morse Code relied on holes punched in paper or the spaces between clicks generated by electricity passing through an electromagnet.
In the Boy Scouts, we learned the code in written form first, a practice frowned upon by serious telegraphers because it slowed one’s deciphering the received code. Code, it was argued, should be regarded as another foreign language. The operator should be able to hear a series of dits and dahs and recognize a word. He shouldn’t have to first visualize the code. He should hear it and know the words as though someone were speaking to him in French.
When the U.S. military abandoned the Morse Code as outdated and slow, old radiomen wrote letters to the newspapers defending their art. It is true that the code can be “copied” when the radio bands make voice communication unworkable, but not enough people knew the code or could copy it at speed sufficient to make it practical.
There was the telephone, after all. And cell phones. And, of course, computers. All of which failed during Hurricane Katrina.
Ham radio operators didn’t use much code during Katrina, compared to the thousands of messages relayed by voice, but it was there if needed.
One of the great ironies of Katrina is that state-of-the-art communications systems, private and ones run by the government, failed. Ham radio operators using relatively inexpensive equipment carried the ball for weeks after the storm.
Now, even ham radio may be turning its back on the code or CW (continuous wave).
The FCC has been asked to drop the code requirement in ham radio licensing which makes sense. CW isn’t used by that many hams, and it keeps young people from applying for radio licenses. Without new blood, it’s feared the government will auction off parts of ham bands to commercial interests.
But hams fear that if the FCC makes it too easy to get an amateur license amateur radio will go the way of Citizens Band.
The code is what attracted me to ham radio. When I get on the air, it is code that I use. I haven’t anything urgent to communicate, so the speed of CW is just right.
I think there’s an argument for keeping the code. Why should everything be easy? Require learning the code, but lower the speed for licensing.
Morse Code is part of the romance of radio, a pastime once so accessible to its devotees that many operators built their own transmitters and receivers.
Old radios with their softly glowing tubes, homemade antennas and handsome brass telegraph keys are art practiced by ordinary Joes and Janes.
The Morse Code was something you could start to learn on a front porch on a rainy afternoon. Last week, when the story on Morse Code ran, men across the country took the occasion to use a language they learned in the service or the Scouts to communicate with kindred spirits. And not in e-mail but by making the sounds themselves or writing out the code.
So primitive. So neat.
___________________________________________________________________
73 de Larry W2LJ
Thursday, March 16, 2006
Progress
The first thing is to enlist the use of a "bug tamer". Even after installing all the weights I have on the pendulum of this thing, the speed is still way too high. By ear, I would estimate somewhere between 25 - 30 WPM. I can copy that; but I'm not comfortable sending that fast. My top reliable accurate sending speed poops out at about 23 WPM right now. So I have enlisted the use of a device to help mechanically slow down the vibrations of the pendulum.
It's nothing more than an aluminum tube which fits over the end of the pendulum, and extends outward. It has a weight at the end. With that installed, I can vary the speed of the bug depending on where I locate the "original" weights on the pendulum. I can slow the bug speed down to about as low as 13 WPM or so. I have it set right now, so that I am at about 18 WPM. I don't want to go too fast, even though I can normally send a little faster. I don't want to develop any sloppy tendencies.
The other thing that I have been using that is a tremendous help is a CW reading program on the computer in the shack. No ....... I'm not using it to decode CW coming off the radio. Sorry guys, but it my eyes, that's akin to blasphemy. But how I do use it, is as follows:
I get the computer program running, turn on the K2 and turn the AF gain all the way down. Then, I turn the VOX circuit off so I can key the rig without putting out any RF. The sidetone still sounds; because on the K2, the sidetone level is independent of the AF gain. So with the AF gain all the way down; and no RF coming out, I can use the K2 as a glorified code practice oscillator. At this point the CW reading program will decode whatever I send !!! I figure that if I can get to the point where I can send good enough so that the computer can reliably read it; then I must be sending out decent (at the very least) Morse Code.
So far so good. I'm still making mistakes, getting used to making those manual dahs is a pain. But what's coming out on the computer screen is starting to be, more often than not, legible copy. By the way, the CW decoding problem that I use is available for free from the AmQRP Website. You can click here, to get it.
73 de Larry W2LJ
Wednesday, March 15, 2006
An Editorial
SOS for a fading skill
A PROPOSAL by the Federal Communications Commission to eliminate the Morse code requirement for gaining an amateur radio license is probably inevitable in the Internet age. Still, it marks another sad surrender to technological advance and a further step away from basic skills that stimulate the mind and improve the human condition.
Nearing the Finish Line
The guys have all done a magnificent job! Last week we gave them a practice exam and they all passed. Last night, we gave them two more. One was given at the beginning of the session; and the second was given at the conclusion. In both instances, everyone "made the grade"! That was very satisfying to see.
One of our six students is the son of one of the other students. They came in as a father and son team. It was a kick to see son get fewer answers wrong on his exam than Dad! Willie, the son, is very interested in Ham Radio. I think he's going to go far with the hobby. More on that in a bit.
I am confident that in two weeks or so, five new callsigns will be issued. Five callsigns from six students? Yep, one of our students went to a Hamfest a couple of weeks ago and already passed his test. I am certain the other five will do just as well.
Next week will be out last session together; but in reality, it is just the beginning. The easy part was helping these folks to get their tickets. Now the work begins. The heavy lifting will be to make sure these guys at least get the chance to stay interested and active.
The Ham who co-taught this class with me is Marvin Bronstein, K2VHW. I cannot say enough about Marv! He is the greatest! He is a broadcast engineer by trade, who works for WABC TV in New York City. Marv has the distinct gift of taking difficult to understand concepts; and translate them into terms that make sense and are no longer mysterious. He came up with a couple of explanations for certain concepts that I've always understood; but now I understand them even better as a result of listening to him. Marv is definitely a "Ham's Ham" and quite an Elmer. His enthusiasm for Amateur Radio, for the students and for garnering new Hams is to be admired. I wish I knew a ton more guys like him.
Our group of South Plainfield Hams has to nurture these guys once they receive their callsigns. After all this work, I'd hate to see any of these guys go to the wayside because they failed to have good mentoring (for lack of a better term). To that end, we'll probably inaugurate some kind of South Plainfield Amateur Radio Club where we can gather and help them in their Amateur Radio endeavors. We've gotten their feet in the door. Now we need to get the rest of their bodies through.
73 de Larry W2LJ
Tuesday, March 14, 2006
A Tale of Two Logs
Since 1992, I have been using Log-EQF and more recently, its Windows variant Win-EQF. It's a very nice program; and I have met the author, Tom Dandrea at the Dayton Hamvention. He's a super nice guy who has written a superb logging program. It's nice and easy to use. It does everything I want it to do; and it fits like a comfortable slipper or loafer. Most importantly, I can attach to each QSO a rather long comment field. I alos use my log as kind of an "Amateur Radio Journal". Not only do I detail what the QSOs were about; but I might also comment on new equipment, band conditions, out of the ordinary weather - all that kind of stuff.
Recently, I have heard rave reviews and have tried using Scott Davis, N3FJP's ACLog. This is also a superb, very nice logging program. Here's the rub. This program is "sexy". It looks and behaves like a Windows program. It looks like an Excel spreadsheet, actually. Win-EQF, on the other hand, looks like a Unix syle program that was made to work with Windows; not FOR Windows! And ACLog offers a degree of customization that Win-EQF doesn't. I can add fields for NAQCC and SKCC membership numbers, for example. I can order the tab number of the data fields; so I can enter data in the order that I want. It's truly a wonderful program with nothing but glowing reviews from it's users.
So what's the dilemma then? It sounds like ACLog is the runaway winner, right? Not so fast, Bunky! Win-EQF has some things going for it that make me want to stay with it anyway. There's the familiarity issue, for one. It's like an old friend that I really don't have to think about; I just "know" it. It displays all the information, I want for the most part (except for the extra fields). And the fact that there's a bit less customization means there are fewer decisions that I have to conciously make.
What to do ...... what to do. For now, they're both on my computer. I'll use them side by side for a while and see which one I gravitate to.
73 de Larry W2LJ
Thursday, March 02, 2006
Buggin' out!
Now that my Vibroplex Original Standard has gone through its restoration process, via yours truly, now comes the time to hook the lil' bugger (pun intended) up and use it.Hooking it up is the easy part. Using it is another thing, entirely. In actuality, it's not difficult to use at all. In fact, it's very much like using a keyer and paddles.
That's the problem!
For the past 22 years, I have been using a keyer and paddles. I used to use a Bug many years ago; but it was MANY years ago! My brain is so used to touching a paddle lever and getting a series of dits and then touching the other paddle to get a series of dahs; that it has become ingrained.
Getting on the Bug the first time wasn't too bad. I pressed the lever in one direction and got a series of well formed and well designed dits. So far, so good. I pressed the lever in the other direction and got one well formed; but interminably long dah! Oh yes, that's right ... I AM THE ONE who has to manually make the dahs! Sorry, not used to that! The tendancy is to leave my finger on the lever way too long! Unfortunately, this is International Morse Code I'm dealing with and not American Morse. There are no extremely loooooong dahs in this system!
What to do? Practice, practice and practice some more! I have been sending imaginary exchanges to my keyer with its speaker turned on. This allows me to conveniently send "off the air". And after a few evenings, I judged that I didn't sound way too terribly. So I got on the air and called a CQ on 80 Meters. A guy came back to me and was actually able to decipher what I was sending! Wow!
In reality, while it's not terrible, I'm not comfortable with the way it sounds. My code with the Bug is still a little disjointed and stacatto. My fist is indeed, legible; but it doesn't "flow" at this point. It sounds more like the orchestra tuning up than playing the actual symphony. I pride myself on my Morse being "liquid" and being easy to listen to and decipher. Maybe I'm my own worst critic; but I am not happy ...... yet.
I need some more practice; but I do think I see the light at the end of the tunnel. Maybe in a few more weeks, I'll actually feel comfortable enough to get on the air and not make a fool of myself (again). I just hope that light I see at the end of the tunnel isn't a train!
73 de Larry W2LJ
Friday, February 24, 2006
Good PR !!!
The following appeared courtesy of Rich Moseson W2VU, editor of CQ Magazine, on the CQ Magazine e-mail reflector. Thanks, Rich, for keeping us informed!
The following is from the CQ-News reflector:
From the CQ Newsroom…
The White House today released its review of the federal response to
Hurricane Katrina, which, according to a statement, "identifies the systemic
problems in Federal emergency preparedness and response revealed by
Hurricane Katrina - and the best solutions to address them." The report
included 17 lessons the Executive Branch learned after reviewing and
analyzing the response to Katrina; made 125 specific recommendations to the
President, and identified 11 critical actions to be completed before the
first day of the 2006 hurricane season.
The report also included a section titled, "What Went Right" in the Katrina
response, which singled out amateur radio operators for particular praise:
*"Other organizations worked tirelessly to assist emergency responders that,
due to the storm, did not have the equipment and means to effectively carry
out their duties. Amateur Radio Operators from both the Amateur Radio
Emergency Service and the American Radio Relay League, monitored distress
calls and rerouted emergency requests for assistance throughout the U.S.
until messages were received by emergency response personnel. A distress
call made from a cell phone on a rooftop in New Orleans to Baton Rouge was
relayed, via ham radio, from Louisiana to Oregon, then Utah, and finally
back to emergency personnel in Louisiana, who rescued the 15 stranded
victims. Ham radio operators voluntarily manned the amateur radio stations
at sites such as the National Hurricane Center, Hurricane Watch Net,
Waterway Net, Skywarn and the Salvation Army Team Emergency Radio Network."
*
Finally, the report identified three immediate priorities:
1) Implementing a comprehensive National Preparedness System "to make
certain that we have a fully national system that ensures unity of effort in
preparing for and responding to natural and man-made disasters;"
2) Creating a "Culture of Preparedness" that "emphasizes that the entire
Nation - at all levels of government, the private sector, communities, and
individual citizens - shares common goals and responsibilities for homeland
security;" and
3) Implement corrective actions "to ensure we do not repeat the problems
encountered during Hurricane Katrina."
A White House fact sheet summarizing the report is available online at
<http://www.whitehouse.gov/news/releases/2006/02/20060223.html>.
(Tnx CQ Public Service Editor Bob Josuweit, WA3PZO)
The full report is also available online at
<http://www.whitehouse.gov/reports/katrina-lessons-learned/>.
73 de Larry W2LJ
Wednesday, February 15, 2006
FCC noncommittal
SB QST @ ARL $ARLB003
ARLB003 FCC noncommittal on "Morse code" proceeding
ZCZC AG03
QST de W1AW
ARRL Bulletin 3 ARLB003
From ARRL Headquarters
Newington CT February 14, 2006
To all radio amateurs
SB QST ARL ARLB003
ARLB003 FCC noncommittal on ''Morse code'' proceeding
Just when the FCC will act on the ''Morse code'' proceeding, WT Docket
05-235, remains hazy. The Commission released a Notice of Proposed
Rule Making and Order (NPRM&O) last July proposing to eliminate the
Element 1 (5 WPM) Morse code requirement for all license classes.
The Amateur Radio community filed more than 3800 comments on the
proceeding, and additional comments continue to show up, even though
the formal comment deadline was last fall. The next--and
most-anticipated--step for the Commission is to formally adopt any
revisions to its rules and conclude the proceeding with a Report and
Order (R&O) that spells out the changes and specifies their
effective date.
''There really is no news,'' an FCC Wireless Telecommunications Bureau
(WTB) staffer told ARRL this week on background. ''We certainly hope
to release WT Docket 05-235 sometime this year, but we're not making
any predictions at this time.'' The WTB staffer indicated there would
be no ''big announcements'' at the Dayton Hamvention FCC Forum either.
Beyond eliminating the Morse requirement, the FCC declined in its
NPRM&O to go forward with any other suggested changes to Amateur
Service licensing rules or operating privileges.
The proceeding began with 18 petitions for rule making--many just
calling for the elimination of the Morse requirement but some asking
for more far-reaching changes in the Amateur Service rules. The
various petitions attracted a total of some 6200 comments. The FCC
subsequently consolidated the petitions--including one from the ARRL
asking the FCC to establish a new entry-level license class and to
retain the Morse requirement for Amateur Extra class
applicants--into a single proceeding designated WT 05-235.
Worth noting is that the FCC did not propose in WT 05-235 to extend
HF privileges to current Technician licensees who have not passed a
Morse code examination. In its NPRM&O the FCC suggested that in a
no-Morse-requirement regime, such ''codeless Techs'' would be able to
gain HF access by taking the Element 3 General class written
examination.
Before it releases an R&O on the Morse code proceeding, however, the
WTB wants to wrap up action in another Amateur Radio-related
docket--the ''Phone Band Expansion'' (or ''Omnibus'') NPRM in WT Docket
04-140, released last April 15. A dozen petitions for rulemaking,
some dating back to 2001, were consolidated in the Omnibus
proceeding. In that NPRM, the Commission proposed to go along with
the ARRL's Novice refarming plan aimed at reallocating the current
Novice/Tech Plus subbands to expand portions of the 80, 40 and 15
meter phone bands. The FCC also agreed with an ARRL proposal to
extend privileges in the current General CW-only HF subbands to
present Novice and Tech Plus licensees (or Technicians with Element
1 credit).
Any FCC decision to eliminate the 5 WPM Morse code requirement for
HF access would have no impact on either the current HF CW-only
subbands or on the CW privileges of Amateur Radio licensees. The
Morse code proceeding neither put forward nor recommended any
changes in CW allocations or privileges.
NNNN
/EX
Sunday, February 12, 2006
He's Got the Cooties!
No ..... not the Cooties; just a Cootie. And this Cootie has nothing to do with imaginary childhood pretend diseases.When I joined the SKCC and started using the straight key on a continued basis, my elbow and arm let me know in no uncertain terms that it was objecting mightily! The prolonged up and down motion was creating a repetetive stress disorder.
So I sold a couple of military jet models on eBay. These were sitting around collecting dust; and in the process, I earned enough cash to purchase an LTA Cootie Key from Marshall Emm, N1FN at MorseXpress.
The Cootie Key, or sideswiper as it is also known, does just that. It allows you to send Morse Code by swinging the lever from side to side; instead of pumping it up and down. You make contact on each side of the swing; so it's more like using two straight keys back to back and then laying them on their sides.
I thought that it was going to take a real long time to get used to it; but fortunately, that hasn't been the case. I guess all those years of using a keyer and paddles has helped. The hardest thing to get used to is that you're making these dits and dahs manually. The temptation is always there to let your "keyer" make you either a string of dits and dahs. I have to constantly remnd myself that there is no keyer and that I have to break contact in order to make more dits and dahs.
After about a week's worth of practice off the air; I have ventured towards using this beautiful key on the air in realtime QSOs. I must be doing okay as no one has called me a "lousy fist" yet; and everyone seems to understand what it is that I'm trying to say.
In any event, practice makes perfect and I'm sure I'll get better and better the more I use it.
73 de Larry W2LJ
Saturday, February 11, 2006
Restoration project
I am embarking on a restoration project; which I don't believe is going to prove to be too difficult. To the left is a Vibroplex bug that I won in an auction on eBay. I got it at the great price of $31.00. Considering the fact that the average Vibrpolex bug goes for well over $100.00 on eBay, I think I got a real good deal.This one is a Vibroplex Standard Original. The serial number dates its manufacture in 1957. That's cool; because this makes this bug as old as me! In any event, this bad boy has a few problems right from the get go. There are no weights on the pendulum; and there was only one finger piece on it when I got it. The picture above shows that I have taken that off. The hole that the finger piece screws into was cross-threaded so I am going to have to retap the hole.
A telephone call to Vibroplex was in order; so I placed an order for two new black finger pieces as well as one heavy and one medium weight. I think this bug was stored somewhere where the humidity is high. A look at the strap underneath shows some heavy oxidation; which can lead to intermittant operation. The strap will have to come off and get polished by the Dremel tool. While I'm at it, the rest of the metal pieces will receive a light buffing from the Dremel, too. The base will receive a gentle going over with a Mr. Clean Magic Eraser. That should get this beauty back in fine business shape! And once it's operational, I am looking forward to the challenge of matering the use of a "speed key".
73 de Larry W2LJ
Thursday, February 02, 2006
The ultimate in recycling!

It has been said that the history of Amateur Radio has time and time again displayed the resourcefulness of Amateur Radio operators.
In 2006 Hams are taking this reputation to the next level! Tomorrow, February 3rd is scheduled to be the launch date for SuitSat.
The Ham Radio ops who are currently assigned to and are living aboard the International Space Station will be making use of an old, worn out Russian space suit. They are filling it with various bits of Kenwood 2 Meter amateur radio gear; and they will be setting it free to float in orbit on its own. The EVA when this is supposed to happen is scheduled for tomorrow; and if all goes well, then SuitSat (as it has become to be known) will be born.
The suit will be under no kind of propelled orbit. It will just be free floating, orbiting around the earth under the influences of orbital and gravitational laws. The batteries that will be powering the equipment are expected to last about six weeks. The suit will be sending out a beacon message; and if the suit is orbiting over your area at a sufficient elevation above the horizon, you should be able to hear the message with an ordinary 2 Meter handheld tuned to 145.990 MHz.
For more information, check out the following links:
http://www.amsat.org/amsat-new/articles/SuitSat/
http://www.suitsat.org
Happy monitoring and good luck! Who knows, this might get you interested in working the various OSCAR satellites that we have up in space. I've done it; and it's a ton of fun!
73 de Larry W2LJ
Sunday, January 22, 2006
Too much fun!
A week ago, maybe two at most, I got wind of a new Yahoo Group that was forming. This one is called the Straight Key Century Club; and it is the brainchild of Tom Peterson KC9ECI. This group is dedicated not only to the CW lover; but to the CW lover who loves to use the original tool of the trade, the straight key. In order to accomodate those who have carpal tunnel problems, the use of bugs and Cootie keys is permissable. That the Morse has to be generated mechanically, is the "key". And no, I'm not sorry for the pun.What is phenominal is how Tom's concept has caught on like wildfire. Over 500 Hams have joined just in the first few fledgling weeks of the club! Fortunately, that tells me that the prophets who have declared that, "CW and Morse Code are dead" clearly have their heads firmly planted up their nether regions.
The club's founders also had the vision to decide to locate the "watering hole" frequencies within the Novice/Tech CW allocations. So not only will entry level Hams get the chance to participate; but the rest of us will make those regions of spectrum sing once again with the delicious sounds of Morse Code.
So, if you love CW (and you probably do if you're even reading this) and you haven't joined the SKCC, then please hop on over to http://groups.yahoo.com/group/skcc/ and see what it's all about!
73 de Larry W2LJ
Thursday, January 12, 2006
Mr. Kotter! Mr. Kotter!
In South Plainfield we have, according to QRZ and HamCall (as well as FCC records) about 50 or so licensed Amateur Radio operators. Maybe five have shown interest in becoming involved with public service communications for the town. A ten percent turnout is definitely disheartening.
So the group of five decided to do something about it. We advertised a Technician License course in the local town newspaper. At an introductory meeting in December, 11 folks showed up. At that time we took the opportunity to explain a bit more about what Amateur Radio is, what it can do; and why we were offering the class.
Six of those eleven people showed up for the class Monday night. I was happy to see so many people show up with so much enthusiasm for Amateur Radio. Over the next 9 -10 Tuesday evenings there will sessions covering every aspect of the hobby needed for these good people to pass their tests and get their licenses.
My hat gets tipped to the ARRL for offering "The Now You're Talkinig" text and associated study materials. Like I said before, the students are showing enthusiasm and a "wanting-to-be-there" attitude that tell sme that this is going to be a ton of fun.
73 de Larry W2LJ
Wednesday, January 11, 2006
Flabbergasted, surprised, shocked and humbled.

Checking my e-mail earlier today, I saw an e-mail from Jim Sheldon WØEB which was titled, "A1 Ops Club". I figured that Jim had been named an A1 Operator and was relating his excitement and joy. A few seconds later, I saw that Jim was congratulating ME on being nominated, seconded and inducted into the A1 Operators Club !!!!!
HooooooooooYaaaaaaaaahhhhhhhhhh !!!!!!!!!!!!
I have dreamed about this moment since my days as a Novice operator some 27 years ago. Then, that was a far away dream - a hope that someday I would be considered a top notch operator. I am elated, flabbergasted, shocked, overjoyed and humbled all at the same time! I have nothing to relate this to on the Amateur Radio Scale of Happiness! This is way better than earning DXCC; or joining the 1000 Miles per Watt Club. This is better than anything. Maybe, just maybe, the only thing that comes close was being named "Elmer of the Year" back in 1998 by my local chapter of the QCWA.
No, this is in a class all by itself. This is better than anything. This is extra special because the A1 Operators Club is a club you cannot join. You have to be nominated and seconded by two Hams who are already members - your peers. You have to be deemed fitting in the following criteria, as it appears on the ARRL Web site.
Membership comes after nomination by two Club members who find the nominee qualified to be a member of this elite group. Nominations should be based on the following:
- General considerations. Transmissions stable, well filtered, and occupying the minimum required bandwidth. On voice, clarity of speech, brevity, uses appropriate words and good grammar. On digital modes, clean tones and appropriate operating-frequency selection. On CW, proper character formation and spacing with appropriate speeds (high-speed ability is not a consideration).
- Procedure. Always listens before transmitting. Appropriately short CQs, avoidance of unnecessary repetition, use of proper procedures and abbreviations recommended by ARRL, avoidance of common inanities in making contacts. When operating a message forwarding system, make sure that traffic is routed to its destination.
- Judgment and courtesy. Courteous, and considerate of the other operator's point of view. Takes every opportunity to assist others, especially beginners. Patient and helpful at all times, and never knowingly operates in such a way as to lessen the pleasure of others.
- Copying ability. This applies to all modes, for there is a knack to passing information through such difficulties as interference from other stations (QRM), atmospheric noises (QRN), fading (QSB), etc.
To the two Hams who nominated and seconded me ..... I thank you from the bottom of my heart. This is the pinnacle of my Ham radio career.
73 de Larry W2LJ
Friday, January 06, 2006
SKN 2006
I only had about four QSOs on New Year's Eve; but they were fun, relaxing and enjoyable. I used two different straight keys and both were a pleasure to use. I started off with an old Western Union J-38 that I acquired from eBay a few years ago. I have it mounted on an extra heavy aluminum base - it goes NOWHERE! I have it adjusted so that the action is barely perceptable, yet positive. I could send all night on that baby.
The other key was the Christmas 2005 miniature key that my wife gave me for Christmas a week ago. It was surprisingly comfortable and easy to use. Even though it is small and light, it has three rubber feet on its base that keeps it where you put it.
24 hours later, on New Year's night it was amazing to see the "difference a day made". That night there were barely ANY signals on 80 Meters and it took me about an hour to drum up a QSO. That ended up being with a local guy who lives probably less than 10 miles or so away from me. It would be nice indeed to have that kind of activity on the bands every night of the year!
73 de Larry W2LJ
PS: We're into the sixth day of January and I've logged 38 QSOs so far this month! Hopefully, I will get a good start on breaking my total for 2005.