We may never come this way again

This is going to sound very weird - but here goes. I was driving home the other day and I heard the Seals & Crofts song with the same lyric - "We may never come this way again." And oddly enough, it brought to mind MFJ and how perhaps we may never see the likes of it again. It's very odd how my brain works, sometimes! Scares even me!

I got to thinking that if there was any MFJ product in particular that I liked, now would be the time to try and find it. Stock is depleting and there haven't been any announcements of an interest coming forward to take on the torch, as it were.

I really, really like my MFJ-1982LP End Fed. Coupled with Dave KD2FSI's MFJ-1982HP, these have been our Field Day antennas for years now with nary a complaint from anyone from SPARC. And the fact that they let us place high in our category every year doesn't damage their reputation any. I've also used it for the Skeeter Hunt and FOBB with satisfactory results. The SWR is excellent on all the bands and really the only band that requires the KX3's autotuner is on 30 Meters.  And even there, it doesn't take the KX3 a long time to match it up. I realize that it's not a tr-band Yagi up at 50 feet, but I'm never going to have one of those, anyway. You play with the hand that you're dealt.

So I decided to try and find one for home, as a replacement for the W3EDP. I found a HP (high power) version at GigaParts. Not only does the LP version seem to be out of stock everywhere, but I do turn up the power to 85 Watts to participate on the St. Max Net on Sunday evenings.

So I purchased one. This antenna is 132 feet long so there might be some finagling to get it to fit in the backyard. I'm thinking I might have to bring the last 20 feet or so down as a sloper. That's not the end of the world, and I'll find a way to make it fit. I had a full sized G5RV up at one time - this should be not much more difficult than that to make fit.

My OCD notwithstanding, from early on in my Novice days, I have found out that antennas don't have to be "perfectly" installed in order to work. My very first antenna was a MOR-GAIN fan dipole. In no way, shape or form did that antenna get installed with the two legs in a straight line!  It was a sharp, horizontal "V", and my Ham friends would come over and look at it and ask me, "How in the world do you make contacts with THAT?" But I did and it served me well for years!

So this is the current configuration of the W3EDP:

If I move that mast all the way back to the corner of our lot (or as far back as I can get it) and make that run a hard "L" instead of  a shallow "V", that will "eat up" more of the wire. Then I'd run it to the other mast at the extreme right back corner of the yard and if there's any wire remaining, I would bring it down as a sloper along the property line on that side of the yard, thusly:

Anyway, that's the plan - and you know that saying about plans, mice and men. But I do want to get this done before Winter sets in. I know, it's still August, but time flies, and before you know it .........

One thing I do know, though. Before any installation, that UNUN will get opened and the solder joints double checked and re-enforced if necessary. I like MFJ products, but you learn from experience.

72 de Larry W2LJ

QRP - When you care to send the very least!